Panasonic KX-TD816 Programming Manual page 222

2.9 Optional Programming
Area Bit
07 15 Selects the bearer when using a
proprietary telephone or DECT portable
station.
16 Reserved
08 1 Reserved
2 Enables or disables the MCID service
even after the caller hangs up. If
enabled, the call will not be
disconnected until you go on-hook.
3-16 Reserved
Selection
• Area code: 01 through 08
• Selection: See "Selection" in the explanation table.
Default
See "Default" shown in the explanation table.
Programming
1.
Enter 990.
Display: System Add Inf.
2.
Press NEXT.
Display: Area NO?
3.
Enter an area code (01 through 08).
Display example: 0010100011000001
4.
Keep pressing or to move the cursor to the desired bit.
5.
Enter your selection (0 or 1).
To change the current entry, press STORE and enter the new selection.
6.
To programme another bit, repeat steps 4 and 5.
7.
Press STORE.
8.
To programme another area, press SELECT and the desired area code.
9.
Repeat steps 4 through 8.
10.
Press END.
222
Explanation
Description Selection Default
0 : 3.1k Audio
1 : Speech
0 : enable
1 : disable
Feature Guide
References
1 ISDN
1 Malicious Call
Identification
(MCID)
General Programming