[435] TIE Added Number
Description
Assigns the added number to the TIE subscriber number which is determined in programme
[43 4]TIE Subscriber Number Removed Digit. This makes the final number which serves as
the extension number. Note that digits are inserted at the beginning of the number
Selection
• TIE table number: 1 through 4
• Number to be added: 4 digits (max.)
Default
All TIE tables – Blank
Programming
1.
Enter 435.
Display: TIE Add Dial
2.
Press NEXT.
Display: Table NO?
3.
Enter a TIE table number.
To enter TIE table number 1, you can also press NEXT.
Display example: 1:
4.
Enter the number to be added.
To change the current entry, press CLEAR and enter the new number.
5.
Press STORE.
6.
To programme another TIE table, press NEXT or PREV, or SELECT and the desired TIE
table number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• Each added number has a maximum of four digits, consisting of 0 through 9.
Features Guide References
E&M (TIE) Line Service
E & M Programming
4.4 TIE Line Programming
317