2.8 Resource Programming
[812] D ISA DTMF Repeat
Description
Selects whether the system transmits DTMF (Dual Tone Multi-Frequency) signals directly to
the central office (CO) or if the system repeats the DTMF signals to CO in order to adjust gain.
This can be done for an outside-to-outside line call via the Direct Inward System Access
(DISA) feature during dialling and / or during an established call.
Selection
• Dial (during dialling) / Call (during an established call)
• Mode: Repeat / Through
Default
Dial and Call – Repeat
Programming
1.
Enter 812.
Display: DISA DTMF Repeat
2.
Press NEXT to programme the mode during dialling.
To programme the mode during an established call, press NEXT again.
Display example: Dial:Repeat
3.
Keep pressing SELECT until the desired selection is displayed.
4.
Press STORE.
5.
Press NEXT to programme the mode during an established call.
Display example: Call:Repeat
6.
Keep pressing SELECT until the desired selection is displayed.
7.
Press STORE.
8.
Press END.
Conditions
None
Features Guide References
Direct Inward System Access (DISA)
206
General Programming