Panasonic KX-TD816 Programming Manual page 355

You can also keep pressing NEXT until the desired PS registration number is displayed.
Display example: PS01:EXT 281
4.
Press STORE.
Display: Rejected (The PS is not registered correctly.)
The display will show the next example below in a few seconds.
Display example: Delete?
5.
Go to Step 7 when not deleting.
6.
Press STORE.
7.
To delete another PS, press NEXT or PREV, or SELECT and the desired PS registration
numbe .
8.
Repeat steps 3 through 7.
9.
Press END.
Conditions
• Deleting the same PS registration number from the PS by PS Programming is only
necessary when it is deleted after "Rejected" is displayed in this programme.
• If a PS registration is terminated in this programme, all the PS assignments and its extension
assignments will return to the default settings. If you only want to change the PS, retaining
all the assignments, re-enter the replacing PS on the old PS registration number in
programme [ 650]PS Registration. In this case, you should reset the system so that the
assignment is activated.
Features Guide References
Digital Wireless Connection
DECT Programming
5.3 Extension Programming
355