Brother Fax-1020Plus Owner's Manual page 21

4. Install the blue, white and black shafts into the cardboard cores of the new ribbon. Pay
special attention to the position of the ribbon as shown in the illustration.
150
White shaft
5. Place the ribbon in the cartridge and close the covers, as shown in the illustration. If the
shafts are not positioned correctly then the cover will not close.
Blue shaft
White shaft
6. Carefully, tighten the ribbon and put the cartridge back into the machine.
SETUP & PREPARATION BEFORE USE - CHAPTER 1
Blue shaft
Cover
New ribbon
Black gear shaft
Black gear
shaft
Hook
1-9