Setting The Remote Access Code - Brother Fax-1020Plus Owner's Manual

Setting the Remote Access Code

The initial setting for the remote access code on your new fax is "159*".
You may change this code if you wish to.
KEYS TO PRESS
1. Press Menu.
2. Press 8.
3. Press 3.
4. Enter a three digit number 000 to
998. The last digit, an asterisk, can
not be changed.
Example: 160* * * * * .
Enter a three digit number 000 to
998.
5. Wait for two seconds.
6. Press Stop to exit.
Helpful Hints
Change the remote control code frequently and use it as a "secret password" to limit access to
your REMOTE FAX OPT.
When you use the Remote Access Code, you must press all four keys (three-digit number plus * ).
REMOTE FAX OPTIONS - CHAPTER 9
THE DISPLAY WILL SHOW:
09/12 15:25
1.TEMP.SETTINGS
8.REMOTE FAX OPT
3.REMOTE ACCESS
ACCESS CODE:159*
ACCESS CODE:160*
3.REMOTE ACCESS
FAX
9-4