Using Memory Security (Only For Fax 1020 Plus); Setting Up The Memory Security For The First Time - Brother Fax-1020Plus Owner's Manual

FUNCTION SETTINGS

Using Memory Security (Only for FAX 1020 Plus)

This feature allows you to prevent unauthorised access to the fax machine. You must use a
password to switch Memory Security ON and OFF.
When switched ON, Memory Security prohibits most functions . The following functions
listed are available while Memory Security is switched ON.
Receiving faxes into memory [limited by Memory Capacity]
Scheduled Delayed Transmission. *
Polling *
Fax Forwarding *
Remote Retrieval
* Provided it was set before Memory Security was switched ON.
NOTE: In the event of a power failure, remaining jobs in memory will be lost.
Setting Up Memory Security for the First Time
KEYS TO PRESS
1. Press Menu.
2. Press 5.
3. Press 8.
4. Enter a four-digit number as a new
password.
5. Press Set.
6. Re-enter the password.
7. Press Set.
8. Press Z (left arrow) or X (right
arrow) to choose SET SECURITY.
9. Press Set.
10. Re-enter a 4-digit password,
followed by set.
This is the same as the security code
of your machine already stored.
4-13
THE DISPLAY WILL SHOW:
09/12 15:25
1.TEMP.SETTINGS
5.USER OPTIONS
8.MEM SECURITY
NEW PASSWD:XXXX
VERIFY:XXXX
SET SECURITY
PASSWORD:XXXX
SECURE MODE
FAX