Brother Fax-1020Plus Owner's Manual page 72

SENDING FAXES
KEYS TO PRESS
1. Insert "Document A" into the feeder.
2. Press Shift + Memory together to
send by multiple transmission.
The display shows remaining
memory.
3. Enter the fax number. (Or a series of
numbers if you are broadcasting.)
4. Press Start to start scanning
documents.
5. Insert "Document B" within 30
seconds after "Document A" has
been scanned. (If you wait more than
30 seconds to scan another
document, the machine will begin to
send the document(s) it has in
memory.)
6. Repeat the step 2, 3, 4.
7. Insert document "C" within 30
seconds of document "B" being
scaned. (If, after 30 seconds there are
no further pages, your fax machine
starts sending documents "A" and
"B").
8. Repeat steps 2, 3 and 4.
9. After 30 seconds, your fax machine
will start sending the documents in
scanned order.
Helpful Hints
1. If you press only Memory instead of Shift + Memory for the last document, your fax machine
will start dialling without waiting for 30 seconds.
2. Multi-transmission is available for up to three destinations, however the total number includes
Timer transmissions. If you set one timer transmission, multi transmission is only available for
two destinations.
6-11
THE DISPLAY WILL SHOW:
09/12 15:25
FAX: NO. & START
COPY: PRESS COPY
MULTI TX
ENTER FAX NO.
SWISS OFFICE
MULTI TX
09/12 15:27
ENTER FAX NO.
THEN PRESS START
MULTI TX
DIALLING
FAX
100%
100%
FAX
70%