Playing An Incoming Voice Message (Icm) And Recorded Memo (Or Memo Manager) / Printing An Incoming Fax Message - Brother Fax-1020Plus Owner's Manual

MESSAGE MANAGER MODE SETTINGS (Only for FAX 1030 Plus)
Playing an Incoming Voice Message (ICM) and Recorded Memo (or
Memo Manager) / Printing an Incoming Fax Message
KEYS TO PRESS
1. Press Play.
(Press Menu and then Play for
Memo Manager.)
- The machine will play first the
ICM, then the Memo continuously
from the oldest one in ICM/
MEMO.
- During the first second that the
message plays, display shows the
current message number/total
number of messages.
For one second, the machine will
beep and the caller ID will flash
on the display if it is received.
- The ICM will start playing and the
date and time it was recorded will
appear on the display.
- You can use Z (left arrow) to
play the message again. If you
press the arrow during the beeping
before the message, the previous
message will be played.
- You can use X (right arrow) to
skip to the next message.
2. After playing all the ICM, the
machine will ask you whether or not
you wish to print any stored fax
messages.
If users enter neither 1 or 2 here, the
machine will not print fax messages.
Example: 1.YES
3. The machine will start printing fax
messages stored in the Message
Manager memory.
NOTE: You can change the speaker volume using Mode and Resolution. (See chap. 7.)
THE DISPLAY WILL SHOW:
VOICE:03 DOC:02
MAIL BOX:1 345
MESSAGE 01/03
9815550101
14:00 09/12/1997
PRINT DOC?
1.YES 2.NO
PRINTING
10-12