Brother MFC-J615W User Manual page 102

Troubleshooting
I cannot complete the wireless network setup configuration. (continued)
Question
Is your Network Key
correct?
Are you using MAC address
filtering?
Is your wireless access
point/router in stealth
mode?
I have checked and tried all
of the above, but still cannot
complete the wireless
configuration. Is there
anything else I can do?
The machine is not found on the network during the MFL-Pro Suite installation.
Question
Are you using security
software?
Is your machine placed too
far from the wireless access
point/router?
Interface Solution
wireless  Reconfirm and choose the correct Network Key.
• The default Network Key may be provided on a label attached to the
wireless access point/router.
• See the instructions supplied with your wireless access point/router
for information on how to find the Network Key.
• Ask the manufacturer of your wireless access point/router or ask your
Internet provider or network administrator.
 For information on what the Network Key is, see Network Key
on page 20.
wireless Confirm that the MAC address of the Brother machine is allowed in the filter.
You can find the MAC address from the machine's control panel. (See MAC
Address on page 75.)
wireless  You should type the correct SSID name or Network Key by hand.
 Check the SSID name or the Network Key in the instructions supplied
with your wireless access point/router and reconfigure the wireless
network setup. (For more information, see Configuring your machine
when the SSID is not broadcast on page 29.)
wireless
Use the Network Connection Repair Tool. (See (Windows
IP address and the Subnet Mask using the Network Connection Repair Tool.
on page 97.)
Interface Solution
wired/  Confirm your settings on the installer dialog.
wireless
 Allow network access to the following programs if your security software
displays an alert message during MFL-Pro Suite installation.
BrC3Rgin.exe
BrnIPMon
Brother Status Monitor (Network)
ControlCenter Program
Generic Host Process f...
Setup.exe
Spooler SubSysytem App
wdsw MFC Application
 For more information about security software, see I'm using security
software. on page 98.
wireless Place your machine within about 3.3 feet (1 meter) from the wireless access
point/router when you configure the wireless network settings.
®
) Confirming the
9
95