Wireless configuration using the Brother installer application
Configuration using WPS or AOSS™ from the control panel
menu (Automatic wireless mode)
Before configuring the wireless settings
IMPORTANT
• If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again.
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.
Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.
• If you are using Windows
all personal firewall software (other than Windows
duration of the configuration. Once you are sure that you can print, configure the software settings
following the instructions again.
Configure the wireless settings
a
(For DCP-J315W, DCP-J515W, MFC-J265W and MFC-J415W)
Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose WLAN Enable, press OK.
Press a or b to choose On, press OK.
(For DCP-J715W, MFC-J615W and MFC-J630W)
Press Menu.
Press a or b to choose Network, press OK.
Press a or b to choose Network I/F, press OK.
Press a or b to choose WLAN, press OK.
b
Turn on your computer.
Close any applications running before you start configuration.
®
Firewall or a firewall function of anti-spyware or antivirus applications, disable
®
Firewall), anti-spyware or antivirus applications for the
4
4
4
4
48