Restoring The Network Settings To Factory Default - Brother MFC-J615W User Manual
Multi-protocol on-board ethernet multi-functional print server and wireless (ieee 802.11b/f) ethernet multi-function print server
Hide thumbs
Also See for MFC-J615W:
- Manual del usuario (131 pages) ,
- Basic user's manual (131 pages) ,
- User manual (129 pages)
Table of Contents
Advertisement
Control panel setup
Restoring the network settings to factory default
If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all wired and wireless network settings to the factory default.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Network Reset.
Press OK.
d
Press 1 for Reset.
e
Press 1 for Reboot.
Note
For DCP models, press + for Network Reset and then press + for Reboot.
f
The machine will re-start.
(For DCP-J715W, MFC-J615W and MFC-J630W) You can now reconnect the network cable and
configure the network settings to work with your network.
5
5
77
Hide quick links:
Advertisement
Table of Contents
