Troubleshooting
I want to check my network devices are working properly.
Question
Is your Brother machine,
access point/router or
network hub turned on?
Where can I find the
machine's network settings,
such as IP address?
Check the Link Status in
the Network Configuration
List.
Is the Brother machine
connecting to the wireless
network?
Interface Solution
wired/
Make sure you have confirmed all instructions in Make sure that the
wireless
following items are configured before reading this chapter. on page 94.
wired/
Printing the Network Configuration List. See Printing the Network
wireless
Configuration List on page 78.
wired/
Printing the Network Configuration List and check that
wireless
Ethernet Link Status or Wireless Link Status is Link OK.
If the Link Status shows Link Down or Failed to Associate, start over
again from the Make sure that the following items are configured before
reading this chapter. on page 94.
wireless
Print the WLAN Report to confirm the state of a wireless connection. (For
how to print, see Printing the WLAN Report on page 79.)
If there is an error code on the printed WLAN report see Troubleshooting in
the Quick Setup Guide.
9
99