Brother MFC-J615W User Manual page 36

Configuring your machine for a wireless network
®
(Windows )
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please choose Install MFL-Pro Suite from
the installation CD-ROM menu.
(Macintosh)
You have completed the wireless network setup. If you would like to continue installing drivers
and software necessary for operating your device, please double-click Start Here OSX in the
installation CD-ROM.
Configuring your machine when the SSID is not broadcast
a
Before configuring your machine we recommend you write down your wireless network settings. You will
need this information before you continue with the configuration.
Check and record the current wireless network settings.
Network name:(SSID, ESSID)
Communication Mode
Infrastructure
Ad-hoc
1
TKIP is supported for WPA-PSK only.
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Infrastructure
Note
If your router uses WEP encryption, enter the key used as the first WEP key. Your Brother machine
supports the use of the first WEP key only.
b
Press Menu.
Authentication method
Open system
Shared key
WPA/WPA2-PSK
Open system
Authentication method
WPA2-PSK
Encryption mode
WEP
NONE
WEP
AES
1
TKIP
WEP
NONE
Encryption mode
AES
Network key
—
—
Network key
12345678
3
3
29