Brother MFC-J615W User Manual page 104

Troubleshooting
The machine cannot print or scan over the network.
The machine is not found on the network even after successful installation. (continued)
Question
Did your previous printing
job fail?
Interface Solution
®
 (Windows )
Confirming the IP address and the Subnet Mask using the Network
Connection Repair Tool.
Use the Network Connection Repair Tool to fix the machine's network
settings. It will assign the correct IP address and the Subnet Mask.
To use the Network Connection Repair Tool follow the steps below:
Note
®
• (Windows
network with the Administrator right.
• Make sure that the Brother machine is turned on and is network-
connected to your computer.
1 (Windows
Click the Start button, All Programs (Programs for
Windows
My Computer.
(Windows Vista
Click the
-
2 Double click Local Disk (C:), Program Files or
Program Files (x86), Browny02, Brother, BrotherNetTool.exe to
run the program.
Note
If the User Account Control screen appears,
(Windows Vista
(Windows
3 Follow the on screen instructions.
4 Check the diagnosis by printing the Network Configuration List.
If the correct IP address and the Subnet mask are still not assigned even
after using the Network Connection Repair Tool, ask the network
administrator for this information, or visit the Brother Solutions Center at
http://solutions.brother.com/
wired/  If the failed printing job is still in the print queue of your computer delete it.
wireless
®
(Windows )

Double-click the printer icon in the Printers and Faxes (Printers for
®
Windows 2000 and Windows Vista
®
7) folder. Choose the Cancel All Documents in the Printer
Windows
menu.
®
2000/XP/Windows Vista /Windows
®
2000/XP, Windows Server
®
2000), Accessories and Windows Explorer, and then
® ®
/Windows 7)
button and Computer.
®
) Click Continue.
®
7) Click Yes.
®
/Devices and Printers for
®
7) Login into the
®
2003/2008)
9
97