Configuring your machine for a wireless network
Step by step chart for wireless network configuration
For Infrastructure mode
a
Confirm your network environment. (See page 23.)
Infrastructure mode
Connected to a computer with an access point
b
Confirm your wireless network setup method. (See page 24.)
Using the Setup
Wizard from the
WPS/AOSS control
control panel
(Recommended)
c
Configure your machine for a wireless network. (See page 27.)
See page 27.
Wireless configuration and installing drivers and software have been completed.
Using the
Using the PIN
Method of Wi-Fi
panel menu
Protected Setup
See page 32.
See page 34.
Installing drivers and software (See the Quick Setup Guide.)
Ad-hoc mode
or
Connected to a wireless capable computer without
an access point
Temporarily using a
USB cable or
network cable
See page 37.
See page 22.
Using the Brother
installer application
Using the
WPS/AOSS control
panel menu
See page 48.
3
3
3
21