Lpuf-40-A And Fpic; Lpuf-40-A - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
Table 5-2 Buttons and indicators on the SPC panel
Component
STATUS
Interfaces
There is no interface on the SPUA and the SPC.
Technical Specifications
Table 5-3
Table 5-3 Technical specifications of the SPUA
Item
Silkscreen of the board name
Dimensions (W x D x H)
Power consumption (typical value)
Board weight
Maximum DC input voltage
CPU dominant frequency

5.2 LPUF-40-A and FPIC

This chapter describes the structure and specifications of the Flexible Card Line Processing Unit
(LPUF-40-A, 2 sub-slots) and FPIC.

5.2.1 LPUF-40-A

Overview
The Flexible Card Line Processing Unit LPUF-40-A provides two slots, each of which can hold
an FPIC.
The LPUF-40-A supports hot swap and supports a maximum of 40-Gbit/s bandwidth.
Issue 01 (2012-11-07)
Description
If the indicator is off, the BootROM does not start.
If the indicator blinks twice every 1s (2 Hz), the BootROM is starting.
If the indicator is on, the APP is starting.
If the indicator blinks once every two seconds (0.5 Hz), the registration
succeeds.
shows the technical specifications of the SPUA.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
SPUA
400 mm x 520 mm x 41 mm
199 W (SPUA01, 10G, with no SPC)
335 W (SPUA02, 20G, with an SPC)
5.3 kg (SPUA01, 10G, with no SPC)
8.0 kg (SPUA02, 20G, with an SPC)
-72 V to -38 V
1 GHz
5 Boards
90