HUAWEI Eudemon8000E Firewall
Hardware Description
Overview
Figure 5-7
Figure 5-7 Appearance of the 2-port 10GBase LAN/WAN-XFP FPIC
Panel
Table 5-13
Table 5-13 Indicators on the panel of the 2-port 10GBase LAN/WAN-XFP FPIC
Indicator
STATUS
indicator (green)
LINK/ACT
indicator(green)
Interface Attributes
Table 5-14
If you configure 10 GE interface to work in WAN mode, use single-mode optical fibers to
connect devices.
Issue 01 (2012-11-07)
shows the appearance of the 2-port 10GBase LAN/WAN-XFP FPIC.
describes the indicators on the panel.
Description
If the indicator blinks once every 2s (0.5 Hz), the LPU is in the normal
state.
If the indicator blinks twice every 1s (2 Hz), the LPU is in the alarm
state.
If the indicator is on, the link is Up.
If the indicator is blinking, the data is being read or written. If the
indicator is off, the link is Down.
lists the interface attributes of the 2-port 10GBase LAN/WAN-XFP FPIC.
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Boards
96