Huawei Eudemon8000E Series Manual page 117

HUAWEI Eudemon8000E Firewall
Hardware Description
Figure 5-12 Panel appearance of the 12-port 100Base-FX/1000Base-X-SFP optical interface
FPIC
Table 5-31 Indicators on the 12-port 100Base-FX/1000Base-X-SFP optical interface FPIC
Component
STATUS (Green)
L/A (Green)
Interface Attributes
Table 5-32
Table 5-32 Interface attributes of the 12-port 100Base-FX/1000Base-X-SFP FPIC
Attribute
Connector type
Interface attributes Complies with the selected XFP optical module.
Working mode
Compliance
Issue 01 (2012-11-07)
Description
If the indicator blinks once every 2s (0.5 Hz), the system is normal.
If the indicator blinks twice every 1s (2 Hz), the system is in alarm mode.
When the indicator is on, it indicates that the link is connected.
If the indicator is blinking, data is being transmitted.
When the indicator is off, it indicates that the link is disconnected.
shows the interface attributes of the 12-port 100Base-FX/1000Base-X-SFP FPIC.
Description
LC/PC
Full-duplex
IEEE 802.3-2002
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Boards
107