HUAWEI Eudemon8000E Firewall
Hardware Description
Figure 6-11 JG2 double-hole bare crimping terminal
6.3.3 Technical Specifications
Table 6-14
Table 6-14 Technical specifications of the chassis and cabinet ground cable
Item
PGND
cable
Fireproof class
6.4 Console Port Cable
This section describes the structure and technical specifications of the console interface cable.
6.4.1 Introduction
The console interface cable is used to connect the console interface on the Eudemon8000E to
the serial interface of the console to transmit configuration data of the Eudemon8000E.
The console interface cable is an 8-core shielded cable. One end of the cable is an RJ45 connector
connected to the console interface on the MPU. The other end has DB9 and DB25 connectors,
either of which is connected to the serial interface on a computer.
6.4.2 Structure
Figure 6-12
assignment on the console interface cable.
Issue 01 (2012-11-07)
lists the technical specifications of the chassis and cabinet ground cable.
Cable type
Terminal
Eudemo
n8000E
Terminal
at the
cabinet
or
groundin
g block
shows the structure of a console interface cable.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
Wire,450/750V,227 IEC 02(RV)25mm
110A
Naked Crimping Terminal,JG2,25mm
Plating,Naked Ring Terminal
Naked Crimping Terminal,OT,25mm
Plating,Naked Ring Terminal
CM
2
,yellow green,
2
,M6,Tin
2
,M8,Tin
Table 6-15
shows the pin
6 Cables
130