Huawei Eudemon8000E Series Manual page 99

HUAWEI Eudemon8000E Firewall
Hardware Description
l
Buttons and Indicators
Table 5-1
Table 5-1 Buttons and indicators on the SPUA panel
Component
OFL button
OFL indicator
(Red)
RUN indicator
(Green)
Table 5-2
Issue 01 (2012-11-07)
Figure 5-3 shows the panel SPUA02 (20G).
Figure 5-3 Panel of the SPUA02 (20G)
SPUA
SPUA
SPCA
SPCA
shows the buttons and indicators on the SPUA panel.
Description
It is a button to send a application signal to the device when removing a
board. Before removing a board, you need to press and hold the OFL button
for about 6s till the OFL indicator is on.
If the indicator is on, you can remove the board.
If the indicator blinks once every 2s (0.5 Hz), it indicates that the board is
normal.
If the indicator blinks twice every 1s (2 Hz), it indicates that the board is in
alarm mode.
shows the indicators on the SPC panel.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Boards
89