Huawei Eudemon8000E Series Manual page 63

HUAWEI Eudemon8000E Firewall
Hardware Description
Figure 3-13 Appearance of the PFU
Table 3-11
Table 3-11 Indicator description
Indicator
STATUS
Functions
l
l
l
l
Specifications
Table 3-12
Table 3-12 Specifications
Parameter
Typical power
consumption
Heat dissipation
Issue 01 (2012-11-07)
shows the indicator description of the PFU.
Description
When the PFU works normally, this indicator remains steady green.
When the PFU generates an alarm, this indicator goes red.
The PFU can send a signal indicating that it is in position.
The hardware of the PFU supports reporting of a signal that the PFU is in position.
The PFU supports hot swap.
2
The I C port of the IC makes the PFU hot-swappable.
The PFU provides indicators.
The PFU provides an indicator (red/green) to indicate the working status of the PFU.
The PFU provides the e-label reading and writing function.
The PFU supports EEPROM extension, allowing you to read and write the e-label.
shows the specifications of the PFU.
Value
2 W
6.5 BTU/hour
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 E8000E-X8 Chassis Overview
53