Huawei Eudemon8000E Series Manual page 114

HUAWEI Eudemon8000E Firewall
Hardware Description
Figure 5-11 Panel appearance of the 1-port 10GBase LAN/WAN-XFP optical interface FPIC
Table 5-26 Indicators on the 1-port 10GBase LAN/WAN-XFP optical interface FPIC
Component
STATUS (Green) If the indicator blinks once every 2s (0.5 Hz), the system is normal.
L/A (Green)
Interface Attributes
Table 5-27
interface flexible card.
If you configure 10 GE interface to work in WAN mode, use single-mode optical fibers to
connect devices.
Issue 01 (2012-11-07)
Description
If the indicator blinks twice every 1s (2 Hz), the system is in alarm mode.
When the indicator is on, it indicates that the link is connected.
If the indicator is blinking, data is being transmitted.
When the indicator is off, it indicates that the link is disconnected.
shows the interface attributes of the 1-port 10GBase LAN/WAN-XFP optical
CAUTION
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
5 Boards
104