Indicators Of E8000E-X8; Fan Module Indicators; Pem Indicators - Huawei Eudemon8000E Series Manual

HUAWEI Eudemon8000E Firewall
Hardware Description
Table A-4
Table A-4 Buttons and indicators on the panel of the SFU
LED
RUN
(green)
ACT
(green)
OFL (red)
A.2 Indicators of E8000E-X8
This chapter presents the indicators of E8000E-X8.
A.2.1 Fan Module Indicators
Table A-5
Table A-5 Description of the indicators on the fan module
Indicator
STATUS
A.2.2 PEM Indicators
Table A-6
Issue 01 (2012-11-07)
lists the status and descriptions of SFU indicators.
Description
Before the registration of the SFU: If the indicator blinks twice every second (2
Hz), it indicates that the system is in the alarm state.
After the registration of the SFU: If the indicator blinks once every two seconds
(0.5 Hz), it indicates that the system runs normally.
If the indicator is on, it indicates that the SFU works normally; if the green
indicator is off, it indicates that the SFU is faulty.
When the SFU works normally, the OFL indicator is off. After the OFL button
is pressed to power off the SFU, the OFL indicator is on.
shows the status and descriptions of the indicators.
Color
Green
Red
shows the status and meaning of the indicators of the PEM.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
A List of Indicators
Description
If the indicator blinks once
every two seconds (0.5 Hz),
it indicates that the fan
module works normally.
If the indicator is steady on, it
indicates that the fan module,
PEM or PFU is faulty.
143