Hitachi CE50-10 Instruction Manual page 114

5. Configuring Software Environment
$ sudo showecmode
Current : Normal mode
Next : Normal mode
$
Then, run the rxversion command to check the device file names and OS versions for the active area and
inactive area (see the bold underlined parts). In this example, confirm that the device file name of the active area
is /dev/sda2.
$ sudo rxversion
<Active><Running>(/dev/sda2)
CTRL-EDGEN-IMG
<Inactive>(/dev/sda3)
CTRL-EDGEN-IMG
<BIOS>
version-information
<RAS MCU F/W>
version-information
<TPM>
version-information
$
12. Log out from the unit.
$ exit
(5) Updating the OS in configuration No. 3
The following describes the procedure for updating the unit OS with the OS file in the external media connected to the
unit. You can perform this operation in normal mode or maintenance mode. The following describes the operation
procedure in normal mode.
(a) Preparation
• Save the following OS files currently stored in the unit, to the external media.
OS file: osprog_base.zip
OS version information file: OSverinfo
• Stop online application operations on the unit.
(b) Operation procedure
Log in to the target unit for updating the OS, and then run the OS update command.
98
model-name version-information
model-name version-information