Hitachi CE50-10 Instruction Manual page 152

7. Maintaining the CE50-10
High order
menu
Security Secure Boot Configuration
Supervisor Password is:
User Password is:
Set Supervisor Password
Supervisor Hint String
Set User Password
User Hint String
Min. password length
Boot Boot Priority Order
Exit Exit Saving Changes
Exit Discarding Changes
Load Setup Defaults
#1
The date and time are applied to the RTC (real time clock) as soon as they are changed.
#2
The CPU frequency and TDP are changed depending on the CPU operation mode (CPU Frequency) as shown below.
Table 7‒3: List of CPU operation modes
CPU Frequency
Normal Frequency
Low Frequency
Change the setting of CPU operation mode (CPU Frequency) according to the operating environment (average ambient temperature
and operation conditions of the unit). For details about the average ambient temperature and operation conditions of the unit, see A.
Unit Specifications.
(5) How to resume the default settings
To resume the default settings of the setup menu items:
1. Start the setup menu (see (1) Starting the setup menu).
2. Open Exit in the high order menu. Position the cursor to Load Setup Defaults, and then press the Enter key.
The following message appears: Load default configuration now?
3. Select Yes, and then press the Enter key.
136
Set item
--
Cleared
Cleared
Enter
Blank
Enter
Blank
8
1. ubuntu
2. PCI LAN
3. USB CD
4. USB HDD
5. ATA HDD0
6. Internal Shell
--
1.6 GHz
1.3 GHz
Default
Do not change the settings.
Specify the priority of devices for starting the
OS and whether the OS starts from each device.
Do not change the settings.
Note that the defaults (shown on the left) were
specified at the time of product shipment, and
are different from the settings specified by
clicking Load Setup Defaults. If you click
Load Setup Defaults, change the setting of
Boot Priority Order to the defaults.
Click this item to save the setup changes to
ROM, and then reboot the system.
Click this item to discard the setup changes, and
then reboot the system with the information that
was saved in ROM the last time.
Click this item to read the BIO default settings.
This only reads the defaults, without saving
them to ROM. To save the settings to ROM, use
Exit Saving Changes.
CPU frequency
12 W
7 W
Notes
TDP