Disklchk - Hitachi CE50-10 Instruction Manual

No.
(14) TPM major version
(15) TPM minor version
(16) A string <Running> is displayed for the currently running partition.
<Execution example>
$ sudo rxversion
<Active><Running>(/dev/sda2)
CTRL-EDGEN-IMG S-700C-M0U 01-00 [12] 05/18/2020
<Inactive>(/dev/sda3)
CTRL-EDGEN-IMG S-700C-M0U 01-00 [12] 05/18/2020
<bios>
47-18 X64
05/20/2020
<RAS MCU F/W>
01-02
<TPM>
47-18
<Diagnosis>
For the exit code, 0 is returned if the status is normal and 1 is returned if an error is detected. Table 5‒34: List of
rxversion command error messages below shows the error message that is output when an error is detected.
Table 5‒34: List of rxversion command error messages
No.
1 usage: /hitachi/bin/rxversion
[ --nodate ]
Note
• Error
If an attempt to collect any of the information items (1) to (11) shown in the display format fails, -- is output.
5.18.8 disklchk
<Name>
disklchk - Diagnose the SSD life.
<Format>

disklchk

<Description>
This command analyzes the write count information managed within the SATA-connected SSD, and displays the
SSD life as a percentage (%) in the following format.
The value used to calculate the percentage is also displayed for each item.
<Display format>
referenced-item-name
Disk write count rate = XX %
<Execution example>
The following is an example when the command is executed for a Hagiwara Solutions SSD.
PROGRAM ERASE COUNT AVGAS = 30
Disk write count rate = 0 %
<Meanings of the items>
The following shows the meanings of items used for calculating percentages.
PROGRAM ERACE COUNT AVG: Average rewrite count for all blocks
Note that only the following type of SSD is applicable. If any other media is installed, an error message appears
and the command terminates abnormally.
Error message
= YY (YY: Value used for calculation)
(XX: Calculation result displayed as a percentage)
5. Configuring Software Environment
Display
Description
The specified argument is invalid.
117