Turning On The Power To The Ce50-10; Starting The Unit - Hitachi CE50-10 Instruction Manual

3.2 Turning on the power to the CE50-10
Turning on the power to the unit starts the OS.
3.2.1 Starting the unit
To start the unit:
1. Make sure that the power cable and ground cable are correctly connected to the unit.
2. After connecting cables to the unit, insert the power cable plug into the outlet.
3. Turn on the main power switch (MAIN POWER).
The POWER lamp (POWER) lights red, and then automatically changes to green and the unit is turned on.
4. When the BIOS starts, the STATUS lamp (STATUS) lights red. When the OS has started and the unit is running,
the STATUS lamp (STATUS) changes to green.
Note
When you turn on the power to this unit for the first time, you need to log in by using the password described in
5.2 Logging in to the unit after powering it on for the first time. See 5.2 Logging in to the unit after powering it
on for the first time and then log in to the unit.
3. Operating the Power Supply of the CE50-10
19