ABB ACS560 Quick Installation And Start-Up Manual page 90

90 Parameter listing
Index Name
96.12 User set I/O mode in1
Not selected[0]
Selected[1]
DI1[2]
96.13 User set I/O mode in2
EN
96.16 Unit selection
HI
Bit
0
3
96.20 Time sync primary source
Internal[0]
96.51 Clear fault and event logger
96.100 Change user pass code
96.101 Confirm user pass code
96.102 User lock functionality
Disable ABB ac-
cess levels[0]
Freeze parameter
lock state[1]
97 Motor control
97.01 Switching frequency reference
97.02 Minimum switching frequency
97.03 Slip gain
97.04 Voltage reserve
Range/List
0...7, 18...20, 24...26
DI2[3] DI5[6]
DI3[4] DI6[7]
DI4[5] Timed function [18]
See parameter 96.12 User
set I/O mode in1
0b0000...0b1111
Name Bit
Power unit 1
Reserved 4
0, 3, 6, 8, 9
Embedded FB[6] Ethernet tool
link[9]
Done[0], Reset[1]
10000000...99999999
10000000...99999999
0000h...FFFFh
Disable file down- Disable panel
load[2] Bluetooth[7]
Reserved[3...6] Reserved[8...10]
2 kHz[2], 4 kHz[4], 8 kHz[8]
12 kHz[12]
Note:
2 kHz option is not available
in R0...R2 frames.
1.5 kHz[1.5], 2 kHz[2], 4
kHz[4], 8 kHz[8], 12 kz[12]
Note:
1.5 kHz option is available
only in R0...R2 frames.
0...200
-4...50
Unit Default
- Not selected[0]
Timed function
2[19]
Timed function
3[20]
Supervision 1[24]
- Not selected[0]
- 0b0000
Name Bit
Reserved 2
Torque unit 5...15
- Panel link[8]
Fieldbus A[3]
- Done [0]
- -
- -
- 0000h
Disable OEM ac-
cess level 1[11]
Disable OEM ac-
cess level 2[12]
- 4 kHz[4]
- 1.5 kHz[1]
% 100
% -2
Supervision 2[25]
Supervision 3[26]
Other...
Name
Temperature
unit
Reserved
Panel link[8]
Disable OEM ac-
cess level 3[13]
Reserved[14...15]