Operator's Seat Controls - Toro LT-F3000 Operator's Manual

Traction Pedals
Forward travel: Press the forward traction pedal to
drive the machine forward and increase ground speed.
Release the pedal to reduce ground speed
Reverse travel: Press the reverse traction pedal to
drive the machine backward and increase ground
speed. Release the pedal to reduce ground speed
(Figure 7).
Stop (Neutral): To stop the machine, use 1 of the
following procedures:
•
Reduce your foot pressure on the traction pedal
and allow it to return to the neutral position. The
machine dynamically brakes to a smooth stop.
•
Tap or hold the reverse pedal briefly. This stops
the machine faster than dynamic braking.
1. Reverse traction pedal
Adjustable Steering Column
Adjust the steering wheel and column only when the
machine is parked on level ground.
1. To tilt the steering wheel, press the foot pedal
down.
2. Position the steering tower to the most
comfortable position and release the pedal
(Figure 8).
(Figure
Figure 7
2. Forward traction pedal
7).

Operator's Seat Controls

Forward/Backward Adjustment
Move the lever upward to adjust the forward/backward
position of the seat. Release the lever to lock the seat
in position (Figure
g014420
1. Lever
12
Figure 8
9).
Figure 9
g014549
g327323