Toro LT-F3000 Operator's Manual page 7

106-6755
1. Engine coolant under
pressure.
2. Explosion hazard—read
the Operator's Manual.
119-4988
1. Lock
1. 8 hour service interval
2. Read the Operator's Manual.
3. 50 hour service interval
4. Check the tire pressure.
5. Check all bolts and nuts for proper tightness.
6. Check all hoses for leaks.
7. Check hydraulic-oil level.
8. Check fuel level.
9. Check engine-oil level.
decal106-6755
3. Warning—do not touch the
hot surface.
4. Warning—read the
Operator's Manual.
decal119-4988
2. Unlock
1. Cutting units—lower/float
2. Cutting units—raise
3. Horn
1. Cutting hazard of hand
2. Cutting hazard of foot
134-1828
10. Check the operation of the seat switch.
11. Check the air filter element.
12. Check the cutting unit settings.
13. Check the engine-coolant level.
14. Check the cleanliness of the radiator.
15. Clean and inspect the machine.
16. Check the wheel nut tightness using a torque wrench, front
wheels 200 N•m, rear wheels 100 N•m.
17. 8 hour service interval
18. 50 hour service interval
7
134-1827
4. Beacon
5. Hazard warning light
40-13–010
decal134-1827
decal40-13-010
decal134-1828