Daily Maintenance Checklist; Notation For Areas Of Concern - Toro LT-F3000 Operator's Manual

Daily Maintenance Checklist

Duplicate this page for routine use.
Maintenance Check Item
Check the engine-oil level.
Check the air filter-blockage indicator.
Drain water the fuel/water separator.
Check for fluid leaks.
Check the cooling system.
Remove debris from the screen and radiator/oil
cooler.
Grease the bearings, bushings, and pivot points.
Check the tire air pressure.
Check the hydraulic fluid level.
heck the hydraulic lines and hoses.
Check the fasteners of the machine.
Check the cutting units.
Check the height-of-cut adjustment.
Inspect the seat belt.
Check the traction pedal operation.
Check the instrument operation.
Check unusual engine noises.
Check the interlock switch operation.
Check the brake operation.
Check unusual operating noises.
Wash the machine. 2
Touch-up damaged paint.
1. Check the glow plug and injector nozzles if the engine starts hard, produces excess smoke, or runs rough.
2. Grease the machine immediately after every washing, regardless of the interval listed

Notation for Areas of Concern

Inspection performed by:
Item Date
1
2
3
4
5
6
For the week of:
2
1
Information
Mon. Tues. Wed.
38
Thurs. Fri. Sat. Sun.