Toro LT-F3000 Operator's Manual page 18

Figure 18
3. To enter the PIN code, press the center button
until the correct first digit appears, then press
the right button to move on to the next digit
(Figure 18B and
until the last digit is entered and press the right
button once more.
4. Press the middle button to enter the PIN code
(Figure 18D).
Wait until the red indicator light of the InfoCenter
illuminates.
Note:
If the InfoCenter accepts the PIN code
and the protected menu is unlocked, the word
"PIN" displays in the upper right corner of the
screen.
Note:
Rotate the key switch to the O
then to the O position locks the protected menu.
N
You can view and change the settings in the Protected
Menu. Once you access the Protected Menu, scroll
down to Protect Settings option. Use the right button
to change the setting. Setting the Protect Settings to
O allows you to view and change the settings in
FF
the Protected Menu without entering the PIN code.
Setting the Protect Settings to O
options and requires you to enter the PIN code to
change the setting in the Protected Menu. After you
set the PIN code, rotate the key switch O
to the O position to enable and save this feature.
N
Figure 18C). Repeat this step
position and
FF
hides the protected
N
and back
FF
Viewing and Changing the
Protected Menu Settings
In the Protected Menu, scroll down to Protect Settings
and perform 1 of the following:
•
To view and change the settings without entering a
PIN code, and use the right button to change the
Protect Settings to O
•
To view and change the settings with a PIN code,
use the left button to change the Protect Settings
to O , set the PIN code, and turn the key in the
N
ignition switch to the O
O position.
N
g338379
18
.
FF
position and then to the
FF