Toshiba TH850A Instruction Manual page 47

When mounting the cover, apply the liquid gasket to the area shown in Fig. 5.8 above.
Also, apply the Loctite adhesives to all set bolts.
• When using the cutter, take careful precautions not to cut the packing body.
• DO NOT peel off the liquid gasket between the cover and packing.
Otherwise, the dust- and drip-proof performance is damaged to cause entry
of water or dust.
• Under some circumstances, the packing may be separated from the cover.
When this happens, apply the liquid gasket to between the cover and
packing at the time of cover mounting.
• Be sure to attach the gasket and apply the liquid gasket. Also, be sure to
coat the Loctite adhesives to all set bolts. Otherwise, the dust- and
drip-proof performance is damaged to cause entry of water or dust.
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Cover
Liquid gasket
Peel off, using a
cutter, etc.
Arm 2 body
Cross section of packing
Fig. 5.8 Arm 2 cover (2)
!
CAUTION
– 47 –
DO NOT peel
off the liquid
gasket.
Packing
Apply the liquid gasket to the full
circumference of this surface
(i.e., the surface from which the
liquid gasket was peeled off to
remove the cover).
STE 80765