When mounting the cover, apply the liquid gasket to the area shown in Fig. 5.5
above. Also, apply the Loctite adhesives to all set bolts.
•
Be sure to attach the gasket and apply the liquid gasket. Also, be sure to
coat the Loctite adhesives to all set bolts. Otherwise, the dust- and
drip-proof performance is damaged to cause entry of water or dust.
5.4.2
Arm 1 Covers
The arm 1 covers are provided above the axis 1 (arm cover 1) and under the axis 2
(arm cover 2). Each cover is secured to the arm 1 with six (6) cross-recessed truss
head screws (M4 × 6) by inserting the gasket. The gasket set surface is coated with
the liquid gasket. Remove the cover while carefully peeling off the liquid gasket, using
a slotted screwdriver, etc.
DUST- & DRIP-PROOF TYPE SPECIFICATIONS MANUAL
Gasket
Cover concurrently
used for battery box
Fig. 5.5 Cover concurrently used for battery box
!
Apply the liquid gasket
throughout this surface.
CAUTION
– 44 –
STE 80765