Mode Setting Switch (Mode); Fl-Net Communication Connector (Fl-Net) - Toshiba FL654A User Manual

2.5 Mode Setting Switch (MODE)

This switch serves as our maintenance and spare switch, and it is used in all OFF state normally. Do
not operate the mode setting switch in the OFF state.

2.6 FL-net Communication Connector (FL-net)

Figure 2-6 FL-net Communication Connector (FL-net)
Connect category 5 or more UTP cable. Match the direction of the RJ-45 connector of the UTP cable
and the FL-net communication connector (FL-net) so that they are inserted.
The FL-net communication connector has integrated LED display of LNK and ACT indicating the
state of the transmission line.
Table 2-4 LED indication of FL-net communication connector
LED
Description of Indication
Name
Indicates the link status of Ethernet.
LNK
On: Link is established
(green)
Off: Link is not established
Indicates the send/receive status of FL-net.
ACT
On: Send and received
(orange)
Off: Not sent or received
MODE
Figure 2-5 Mode Setting Switch (MODE)
LNK
FL-net
ACT
The cause of turning OFF is as follows.
・ Transmission line fault
The cause of turning OFF is as follows.
・ Transmission line fault
Unified Controller nv Series FL-net Remote I/O Station Module FL654A User's Manual
2.5 Mode Setting Swith (MODE)
Possible Cause in Details
2
Indication
in Normal
Status
ON
(green)
ON
(orange)
9