Chapter 5 I/O configuration information
5.4 Procedure for Checking I/O Configuration Information
When entering [Enter] on the terminal software startup screen, the I / O configuration information will
be displayed on the PC screen. If there is no problem with the I / O configuration information, please
press [Enter] with [Y]. Figure 5-2 shows an example display of I / O configuration information.
This information is written to the internal nonvolatile memory.
How to read the display in Figure 5-2:
(1) In case of basic unit
SLOT (0) is the slot on the right of FL 654A.
(2) In the case of the expansion unit
5
SLOT (0) is the left edge of the mountable slot.
30
6F8C1625