Memory Clear Function - Toshiba FL654A User Manual

9.1.2 Memory Clear Function

Initialize the FL654A.
When FL654A used in AUTO / LOCK specification is changed in TOOL specification, please
switch specification after executing "memory clear" for deleting inside information. Even an
opposite usage is similar.
Moreover, in TOOL specification, please execute download again after executing "memory clear"
when it doesn't normally complete download.
The initializing procedure is as follows:
(1) Select the relevant I/O station in the system's station configuration of the nV-Tool and right click
on it to display the menu. In this menu, select "System View...".
(2) In the System View (Station Status) screen, select "FL654" in the Main Module Type column
and click the Maintenance button. In the Maintenance Panel screen, click the Memory
Operation tab to display its panel. Then select "Clear memory" in the Command box and click
the OK button to start memory initialization.
Note
・ FL654A is registered in module FL654.
Unified Controller nv Series FL-net Remote I/O Station Module FL654A User's Manual
9.1 Maintenance Function
9
75