Craftsman G10-0R7G-2SB Manual page 103

Traverse range:The traverse running is limited by upper and low frequency.
The traverse range relative to the center frequency: traverse range AW=center
frequency*traverse range F08.12.
Sudden jumping frequency=traverse range AW *sudden jumping frequency range
F08.13.When run at the traverse frequency, the value which is relative to the sudden
jumping frequency.
The raising time of the traverse frequency:The time from the lowest point to the highest
one.
The declining time of the traverse frequency:The time from the highest point to the
lowest one.
Code
F8.16
F8.17
F8.18
F8.19
Setting the testing-value of the output frequency and the lag value of The output action
removing.as shown in following figure:
Fig.6-17 Traverse operation diagram
Name
FDT1 level
FDT1 lag
FDT2 level
FDT2 lag
103
Setting Range
0.00 Hzÿ^F0.07
0 50.00Hz0
0.00~10.00Hz0 1.00Hz0
0.00 Hzÿ^F0.07
0 50.00Hz0
0.00~10.00Hz0 1.00Hz0