Table of Contents
Advertisement
Wiring
● Never connect AC power to output UVW terminals,otherwise may cause inverter
fault.
● It is forbidden to connect capacitor or phase advance LC/RC noise filter to output
side of inverter,Otherwise may cause inverter fault.
● Confirm the power phase number, rated voltage is consistent with the product
nameplate, otherwise it may cause inverter fault.
● Inverter main circuit wiring and control circuit wiring should be separate wiring or
vertical cross, otherwise it will cause control signal interference.
● When the cable length between the inverter and motor exceeds 100 meters, it is
recommended to use output reactor, in order to avoid too much of the distributed
capacitance current resulting in failure of the inverter.
Running
●
Do not touch the inverter and its surrounding circuit with wet hand, otherwise there
is risk of electric shock.
●
Inverter wiring is complete and mount plate before electricity, charged conditions
are strictly forbidden to remove the cover plate, otherwise there is risk of electric
shock.
●
When setting the function of fault automatic reset or power failure after
restarting,dealing with machinery and equipment security isolation measures,
otherwise it may cause injuries.
●
After confirming the run command is cut off, you chould reset the fault and alarm
signals, otherwise it may cause injuries.
CAUTION
DANGER
6
Advertisement
Table of Contents
