Craftsman G10-0R7G-2SB Manual page 107

380V model factory value: 700V
220V model factory value: 380V
The Code is to set the starting bus voltage of the energy consumption brake.
Appropriate adjustment of this value can effectively brake the load.
Code
F8.26
This parameter is used to set ACC/DEC time units.
0:0.1s
1:0.01s
Code
F8.27
0:Auto stop mode:The fan keeps working when the inverter is running.When the
inverter stops,whether the fan works or not depends on the module temperature of
inverter.
1:The fan keeps working when powering on.
Code
F8.28
When the bus voltage is too high, on the basis of the current frequency automatic
rise F8.28 Settings, to stabilize the busbar voltage, reduce overvoltage faults occur.
Code
F8.29
F8.30
F8.31
These parameters and the choice of open collector output function is 18, 19, 20, 21.
Code
F8.32
Name
ACC/DEC time unit
Name
Fan control
Name2
Over voltage rise frequency
Name
AI1 Comparison threshold 1
AI1 Comparison threshold 2
AI1 Comparative residual
Name
Frequency resolution
107
0 380V0
Setting Range
0ÿ^10 00
Setting Range
0ÿ^10 00
Setting Range
0.00ÿ^10.00Hz0 00
Setting Range
0.00ÿ^10.00V0 00
0.00ÿ^10.00V0 00
0.00ÿ^1.00V0 0.200
Setting Range
0ÿ^10 00