Craftsman G10-0R7G-2SB Manual page 58

stage speed setting,then the multi-stage setting has the priority which is lower than the
priority of jogging.Olny stage 1ÿ^15 can be set when multi-stage setting has the
priority.So stage 0ÿ^15 can be set when F0.02 is multi-stage speed setting.
6ÿ PID control
The running mode is procedure PID control when selecting this parameter.It is a
necessary to set F9 group.The reference frequency is the result of PID adjustment.For
details,please refer to description of F9 group.
7ÿ Remote communication
The frequency command is given by the upper monitor through communication
given.Please refer to MODBUS communication protocol.
8ÿ Keyboard potentiometer
The frequency is given by the keyboard potentiometer.
Code
F0.03
F0.04
F0.03:
Frequency Source B selection is same as F0.02,Please refer to the instruction of
F0.02
carefully.
F0.04ÿ
0:Maximum output frequency
100% of B frequency setting corresponds to the maximum output frequency.
1:A frequency command
Name
Frequency Source B selection
Frequency Source B reference
58
Setting Range
0ÿ^80 10
0ÿ^10 00