Inspection and maintenance
3.2
Mechanical inspection
WARNING
3.2.1
Back wheels and support rollers
NOTE
•
Elevate one side of the system by placing a piece of wood under the chassis
(Fig. 1 / p.
•
Secure the wheel on the other side with 2 blocks. Ensure that the MOBILETT XP Digital
is secure!
•
Remove the wheel cap and wheel
Fig. 1:
3.2.1.1
Back wheels
SIM
Brake pad
•
Check the brake pad
1mm), replace the brake according to the "Replacement of parts" instructions.
SIM
Drive belt
Siemens AG
Medical Solutions
There is a danger of life-threatening electrical shock. It is possible
to come into contact with live parts when the covers are removed.
Carelessness can result in death or serious bodily injury.
Follow the general and product-specific protective mea-
sures.
First perform the following work steps listed in the "Back wheels
and support rollers" section one one side. Then check the other
side in the same manner.
37).
Braked wheels
(Fig. 2 / p.
SPR8-230.831.30.03.02
11.05
(Fig. 1 / p.
37).
38). The brake pad must be > 1mm. If worn (pad <
Page 37 of 74
CS SD 24
37
MOBILETT XP Digital