Inspection and maintenance
3.2.7.4
Adjusting screw and cantilever
WARNING
SIM
Lock nuts
•
Verify that the lock nuts on the adjusting screw are properly seated
SIM
Attaching the base
•
Verify that the base attachment in the chassis is secure
Fig. 11: Adjusting screw and cantilever attachment
3.2.7.5
Cable harness for the arm system
SIM
Undamaged
•
Check all support arm cabling for damage (stretching, twisting, insulation cracks). Pay
special attention to the stress points of moving elements
•
Replace any damaged cables.
Siemens AG
Medical Solutions
Uncontrolled system movements pose danger of injury.
The support can fall if the adjusting screws are unscrewed incor-
rectly!
Carelessness can result in death or serious bodily injury.
SPR8-230.831.30.03.02
11.05
(Fig. 11 / p.
(Fig. 11 / p.
45).
(Fig. 12 / p.
46).
MOBILETT XP Digital
Page 45 of 74
CS SD 24
45
45).