Table of Contents
Advertisement
Connecting and Assembling the Antenna
20
3. Connect the antenna to the receiver by turning the connector
screw (A) at the base of the antenna so that the two spaces (B) are
positioned at the top and bottom. These fit over the two notches
(C) on the receiver antenna socket.
4. Push the antenna onto the input socket
5. Turn the connector screw (A) clockwise until it stops.
To remove the antenna from the receiver turn the connector screw (A)
anti-clockwise and pull the antenna out of the socket.
.
Chapter 3 - Setting Up the System
Advertisement
Table of Contents
