Table of Contents
Advertisement
On a Wall
On a Wall
48
To mount the receiver on a wall you need a Telemetry Receiver Mounting
Kit (M1310-64150)
To subsequently mount a Series 50 A/IP monitor on the receiver you
need a Fetal Monitor Wall Mounting Kit (M1353-64160)
1. To fit the Receiver Mounting Kit to the wall and the telemetry
receiver, refer to the instructions supplied with the kit.
2. Turn the receiver so that the Power On/Off button and lights face
upwards.
3. From above, slide the V mounting plate on the receiver into the
mounting plate on the wall.
Chapter 8 - Mounting the Receiver
Advertisement
Table of Contents
