Testing the Receiver
Testing the Receiver
54
To run the receiver self test:
1. Switch on the monitor and recorder.
2. Press the Power On/Off button to switch the receiver on.
3. When you switch on:
• The receiver On light (A) comes on.
• The nurse call light (B) and the battery low light (D) are lit for one
second.
• The transmission INOP light (C) lights and stays lit until the
transmitter is switched on.
• The telemetry lamp indicator on the monitor lights, indicating
telemetry monitoring mode.
•
is annotated on the fetal trace.
TELE
Chapter 9 - Maintenance and Performance Assurance