Espresso Temperature; Adjust Espresso Volume - Silvercrest SSMS 1350 B2 Operating Instructions Manual

2. When the LED rings light up one after
the other, press the button for the de-
sired hardness range:
Hardness
soft
range:
When the LED ring
the new setting is saved.

14.3 Espresso temperature

The temperature of the water when extract-
ing the espresso can be modified to adapt it
to different types of coffee and to your taste.
For dark roasting the temperature should be
lower and for light roasting higher.
You can choose between three temperature
ranges: low, medium, hot.
The default setting on delivery is medium.
Requirement: the menu is selected. The
3 LED rings 17, 18, 19 flash twice in turn,
one after the other.
1. Press the button
The LED rings 17, 18, 19 briefly indicate
the current temperature range once:
Temperature
range:
medium hard
X
X
X
18 flashes 3 times,
17.
low medium hot
X X
— X
— —
2. When the LED rings light up one after
the other, press the button for the de-
sired hardness range:
Temperature
range:
When the LED ring
the new setting is saved.

14.4 Adjust espresso volume

NOTE: the volume of espresso dispensed is
also influenced by the quantity and the com-
pression of the espresso powder.
This memory function allows you to adjust
the amount of espresso dispensed according
to your cups and preferences. The setting is
made indirectly via the preparation time.
NOTE: the preparation time can be be-
tween 20 and 75 seconds. If you select a
shorter or longer time, the previously saved
time is retained.
Single espresso
Requirement: the device is ready to be used.
The LED rings 17, 18 are permanently lit.
X
1. Prepare the filter 2, portafilter 16 and
espresso powder for a single espresso
and clamp the portafilter under the
X
brewing head 14.
2. Place the desired espresso cup under
X the brewing head 14.
low medium hot
X
X
X
17 flashes 3 times,
79
GB