Epson Disc Producer PP-100NII User Manual page 109

Set [Output Device], [Input Stacker], [Output Stacker], [Write Speed], [Write Verification],
3
[Label Type], [Print Mode Setting], and [Copies] as necessary.
• The writing speed may be slower than the set speed depending on the discs or computer
being used.
• Depending on the discs used, writing may not be able to be performed properly at the
speed recommended for the disc. If this happens, write at a slower speed. In particular, we
recommend writing to DVD±R DL at a slow speed.
• If you print on the matte label type of Epson specified discs, set [Label Type] to [CD/DVD
Premium Label].
• If [Label Type] is set to [EPSON Specified CD/DVD Label,] [Print Mode Setting] is set to [1].
If [Compare] is set for [Write Verification], you can confirm whether data was written to discs
properly.
Click [Publish].
4
Publishing Discs
109