Registering Write Data - Epson Disc Producer PP-100NII User Manual

Registering write data

Follow the steps below to register write data in the disc view of EPSON Total Disc Maker.
There is no need to register write data if you only want to print disc labels.
This section describes an example of the procedure to publish photo data CDs.
1 Start EPSON Total Disc Maker.
See "Starting EPSON Total Disc Maker" on page 42 in this guide for the start procedure.
The disc view appears.
Select [Data CD] for [Type], and click [Apply].
2
If the disc type you want to publish differs from that set for the input stacker, ask the
administrator to change the disc type of the input stacker.
Publishing Discs
92